Cookie Consent by Free Privacy Policy Generator
PeMaC Kft. Pályázatok


Production preparation

Before series production, the very first tasks are carried out by our technical preparation colleagues in order to ensure smooth manufacturability.

In the first step, we receive the basic data of the products the customer wants to manufacture from the employees of our Austrian parent company, H&S Kabeltechnik, in the form of a parts list and customer drawing or customer sample. The employees of the preparatory office are in constant contact with our customers and Austrian colleagues, namely they act on any questions arising in the case of any production difficulties or ideas that make production easier. After the first successful negotiations, the preparation of the production drawing can begin. This operation requires detailed knowledge of manufacturing processes to avoid foreseeable manufacturing difficulties and errors.

Gyártási rajz a Pemac-nál
If the production documentation is ready to start the sample (own prototype), they reach our sampling department with a small number of pieces, where they carefully start the production of the samples and the preparation of the laying templates, while also paying attention to avoiding further production line errors.
The sample produced and delivered by will be checked by the customer, and if it meets his expectations, he will authorize the start of serial production.

Cable cutting

In order to meet the high requirements imposed on us in terms of quality and workmanship, we use only the most modern equipment that complies with processes according to the ISO9001 standard.
Whether it’s a sheathed cable or a single-core cable, we strive for perfection and realize our customers’ ideas. The cables are delivered in a cable drum. The drum goes into the cable cutting machine, which cuts the cable to size based on the parameters set by the operator, and strips it on both sides for further processing.

Cable marking

When cutting cables and wires, it is also possible to print and mark them with any inscription or pattern.

When printing, quality aspects such as legibility, print size and indelibility should be taken into account.

Kabelmarkierung - PeMaC Kábeltechnika Kft.


This is an air-tight connection between the contact and the twisted wire, one of the most important processes in cable assembly.

High-quality crimping determines the service life of the crimp connection. For this, it is essential that tools and machines of suitable quality are available. Crimping can be done with manual pliers, semi- or fully automatic machines. To check and maintain quality, we measure the pull-force and perform a grinding test.

Snapping, screwing, pressing into the housing

The contacts pressed onto the ends of the cables are installed in connectors of different sizes, shapes and colours. This can be done by snapping, screwing or pressing, depending on the design of the connector to be installed at the end of the cable, and what is determined by the customer's specifications.

By means of our semi-automatic press machines, we can process nearly 100 types of Lumberg connectors.
The machines provide the appropriate pressing height according to the standard, and correct connection can be guaranteed with the help of the built-in colour sensors.
All additional connectors are pressed with a lever press or, in some cases, with hand pliers.

Electrical testing

One of the main strengths of PeMaC is that every single cable manufactured by us is subjected to an electrical test, in contrast to other cable assembly companies, where such tests are only carried out on a random basis. During the electrical test, we filter out pole reversals, cable breaks and short circuits.

Soldering and tinning

When soldering, metal parts are joined by a metal alloy (solder) under the influence of heat. The melting point of the solder is lower than that of the metals to be joined. From the melting temperature, the molten solder flows between the metal parts. If the soldering is correct, a strong, tight, corrosion-resistant, current- and heat-conducting connection is created between the solder and the other metals.

HOTMELT (Low pressure molding)

Due to the low tool costs, low-pressure injection molding is a suitable solution even for small quantities. This process is significantly cheaper than the conventional injection molding technique.

The equipment works with low pressure, which enables the use of cost-saving and quickly produced aluminium molds.
We design all molds ourselves, taking into account the customers’ needs. The low injection pressure and the low processing temperature make it possible to provide mechanical protection to sensitive electronic components (circuit boards, relays, etc.) with such injection molding technology.

Areas of application of low-pressure injection molding:

Quality assurance

Our company pays special attention to quality control, not only for the finished product, but also during sub-processes such as crimping, connector installation or cable bundling, thus ensuring 100% satisfaction of our partners. For each new cable, we produce a sample to perfect our documentation and eliminate possible errors.

Cable assemblies

The cable assemblies are made on a pre-manufactured template, thanks to the joint work of our template makers and the technical department. The production drawing and the template determine together from which point to where the wires go. Regardless of the complexity of the cable assembly, we always strive for the simplest possible solutions to enable our employees to learn the process of manufacturing the product easily.

Kábelkorbács - PeMaC Kábeltechnika Kft.Kábelkorbács - PeMaC Kábeltechnika Kft.

Final inspection / packaging
After the electrical testing - in accordance with our regulations - the cables undergo a final inspection, so that only the best quality ones will be delivered to the customer. After that, the products are packed either in cardboard boxes or in environmentally friendly, reusable plastic crates.


In the PeMaC warehouse, we store the base materials necessary for the production of assemblies on 3 levels and in 4 rows. This warehouse has a floor area of 135 meters long and 15 meters wide, since proper organization and efficient movement of base materials are essential. Colleagues working in the warehouse can access the most important information, such as the location and quantity of base materials, through a computer system. The warehouse also includes 2 dynamic storage systems.

Paternoster storage systems work on the principle of circulation. Like a carousel, the goods rotate to the operator opening, where the operator can easily and safely take them out.

Share this web page!